Galvanized steel pipe is one of the most popular types used for water pipes, construction and structural pipe. Like most steel pipes, there are a number of different ways to cut galvanized steel pipe the most used are sawing machine cutting, cutter machine or threading machine and gas cutting, among them saw cutting is a commonly used method for limited space and without extra equipment, here we introduce some tips of saw cutting for you.
One way to cut galvanized steel pipe is to use a hacksaw. The first step is to ensure that the pipe is in the right position and that you have the right tools for the job. Using the wrong tools can damage your pipe and cause injury. When cutting galvanized steel pipe, ensure that the pipe is level and secure in a tabletop or sawhorse. Then, position the pipe table-wise so that the teeth are aligned with the line of the cut. The second step is to measure the length and the size of the pipe you are cutting. Using a Carpenter’s measuring tape or a ruler will help you measure the right length. Therefore, safety should always be a priority when cutting any kind of pipe. Tips are shown below:
- Wipe the surface of the galvanized pipe completely with a soft cloth at the cut area;
- When cutting, use vice pliers and other galvanized pipe fixers before continuing to cut;
- Appropriate force is essential. The cutting line should be at right angles to the axis of the galvanized pipe. Excessive force is the cause of cutting the galvanized pipe into flat or ellipse;
- The cutting surface of the iron filings, piercing edge should be completely removed with files and other tools to prevent them in insertion of another joint when scraping rubber O-ring and other accessories.
This method involves spinning the blade around the pipe, and it will take a long time. Also, you will need to sand the pipe beforehand to ensure a smooth cut. Be sure to cut in the right spot, and do not press down too much on the blade, as this can cause damage to the GI steel pipe and prevent a clean cut. You should also draw a line on the pipe so that you can make an accurate cut. You should also wear protective gloves and goggles so that you don’t get cut while cutting.
Another way to cut galvanized steel pipe is to use a reciprocating saw. These tools are excellent tools for cutting a wide variety of materials, including galvanized pipes. They can be particularly useful for cutting the pipe in tight spaces. If you don’t have a reciprocating saw, you can use an angle grinder to cut the pipe. It is a bit more time-consuming than a circular saw, but can cut galvanized steel pipe quickly and accurately, which is also useful for smaller spaces.
This threading machine method is faster than using a tap and die set. You should also apply some threader oil to the pipe. This will help the threads to start and finish without leaving any traces behind. Afterward, you should clean the threader thoroughly and remove remnants. However, it is essential to use the right tools and protective gear before you attempt to cut the pipe, with the right tools and protective clothing, cutting galvanized steel pipes is a simple and effective job.